UFW vs firewalld vs nftables vs iptables: which Linux firewall to use
UFW, firewalld, nftables and iptables are not four rival firewalls. Learn how they fit together, what each distro uses by default and how to pick one tool for your VPS.
- Beginner
- Linux VPS
- 5 min read
Linux has one packet filter in the kernel, called netfilter, and several tools for writing rules into it. UFW, firewalld, nftables and iptables are those tools. This guide explains how they relate, which one your distribution expects, and how to choose one and stick with it so your rules stay predictable.
Before you start
- A RunRacks Linux VPS with root or sudo access over SSH.
- Know which distribution you run. Check with:
cat /etc/os-release- Know how to reach the browser console in the control panel of your Dashboard. It works even if a firewall rule blocks SSH.
How the four tools fit together
Think of it as layers, from the kernel up:
- netfilter is the filtering engine inside the Linux kernel. Every tool below writes rules for it.
- iptables is the classic command-line tool. It has separate commands for IPv4 (
iptables) and IPv6 (ip6tables). - nftables (the
nftcommand) is the modern replacement for iptables. One ruleset covers IPv4 and IPv6, and it supports sets and maps natively. - UFW (Uncomplicated Firewall) is a friendly front end. You type
ufw allow 22/tcpand it writes the low-level rules for you. - firewalld is another front end, built around zones and services. It uses nftables as its backend on current releases.
On modern distributions the iptables command itself is usually iptables-nft: it accepts the old syntax but stores the rules in nftables. Check yours:
iptables --versionOutput ending in (nf_tables) means the nftables backend. (legacy) means the old kernel tables.
What each distribution uses by default
- Ubuntu 22.04 and 24.04: UFW is installed but inactive. It is the natural choice on Ubuntu.
- Debian 12: nftables is the default framework. UFW is not installed by default but is available with
apt install ufw. - AlmaLinux and Rocky Linux 8 and 9: firewalld is installed and normally enabled, using nftables underneath.
Your provider image may differ slightly, so check what is actually active:
systemctl is-active ufw firewalld nftables
sudo ufw status 2>/dev/null
sudo firewall-cmd --state 2>/dev/nullWhen to pick each tool
- Pick UFW on Ubuntu or Debian when you want a few simple allow rules: SSH, HTTP, HTTPS. It is the easiest to read and hard to get badly wrong. Start with Set up UFW on Ubuntu and Debian.
- Pick firewalld on AlmaLinux or Rocky Linux, or when you want zones, such as a trusted zone for your office IP. Start with Set up firewalld on AlmaLinux and Rocky Linux.
- Pick nftables directly when you need full control: complex NAT, large sets of IPs, or a single readable config file under version control. The nftables basics guide covers the syntax.
- Pick iptables only when an older script or tool requires it. For new setups, nftables does the same job with cleaner syntax.
Control panels and some apps bring their own firewall. cPanel and DirectAdmin often use CSF, and Plesk has its own firewall extension. If you use a panel, manage the firewall through the panel instead of adding another tool.
Never run two firewall managers
Each front end assumes it owns the ruleset. If UFW and firewalld both run, they overwrite or shadow each other's rules, and a reboot can leave you with a ruleset neither tool expects. Pick one and disable the others.
Before you enable any firewall, allow SSH first. A default-deny policy without an SSH rule cuts your session and blocks new logins. If that happens, log in through the browser console in your Dashboard and fix the rule.
For example, to keep UFW and remove firewalld on a Debian-family server:
sudo ufw allow OpenSSH
sudo systemctl disable --now firewalld
sudo ufw enableOr to keep firewalld and drop UFW on an AlmaLinux server:
sudo systemctl disable --now ufw
sudo firewall-cmd --permanent --add-service=ssh
sudo firewall-cmd --reloadIf you moved SSH to a custom port, allow that port instead of the service name.
Docker is a special case. It inserts its own iptables or nftables rules for published ports, which can bypass UFW. If you run containers, read the guide on stopping Docker from bypassing UFW.
Check it works
Confirm only one manager is active:
systemctl is-active ufw firewalld nftablesThen view the effective ruleset that the kernel is using, whatever tool wrote it:
sudo nft list ruleset | lessFinally, open a second SSH session from your computer before closing the first. If it connects, your SSH rule works.
Troubleshooting
- Rules you added disappear after a reboot: two tools are fighting, or you used a raw
iptablescommand without saving it. Disable the extra manager and save rules the way your chosen tool expects. - `ufw status` shows a port open but it is still blocked: another layer, such as firewalld or a leftover nftables table, is dropping it. Check
sudo nft list rulesetfor tables UFW did not create. - `iptables -L` is empty but traffic is filtered: your rules live in nftables. Use
nft list rulesetinstead. - Locked out after enabling a firewall: use the browser console in your Dashboard, disable the firewall, add the SSH rule and enable it again. See Locked out by your firewall?.
Next steps
- Set up the default for Ubuntu: Set up UFW on Ubuntu and Debian.
- Make firewall changes without risk: Test firewall changes with an automatic rollback.
- Need a server with full root access to run your own firewall? See Linux VPS plans.
Was this guide helpful?
Still stuck?
Ask RunRacks AI for a quick answer, or open a ticket and our team will take a look at your server.
Related guides
Security
Check the Windows Firewall rule for RDP port 12230
Find and verify the inbound TCP 12230 rule that lets Remote Desktop reach your RunRacks server, recreate it if it was deleted and scope it without locking yourself out.
- Intermediate
- Windows VPS · Admin RDP
- 5 min read
Security
Linux Security: Using aide for File Integrity Monitoring on VPS
AIDE builds a checksum database of your system files and reports anything that changed. This guide installs it, creates a baseline, tunes the rules and schedules daily checks on a Linux VPS.
- Advanced
- Linux VPS
- 6 min read
Security
iptables basics: list, allow, drop and save rules
Learn how iptables chains and rule order work, then build a small ruleset that allows SSH and web traffic, drops everything else and can be edited by line number.
- Intermediate
- Linux VPS
- 6 min read